BRLMB - SPEDHIDE ALKYD GLOSS ENAMELS 6-F, 6-276

  • MSDS: BRLMB
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SPEDHIDE ALKYD GLOSS ENAMELS 6-F, 6-276
  • National Stock Number: 8010-00N039911
Product Identification

Product ID:SPEDHIDE ALKYD GLOSS ENAMELS 6-F, 6-276
MSDS Date:01/09/1991
FSC:8010
NIIN:00N039911
MSDS Number: BRLMB

Responsible Party
PPG INDUSTRIES INC
4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555; 800-441-9695

Cage: 20696

Contractor
PPG INDUSTRIES INC
ALLISON PARK, PA 15101 US

Telephone: 412-492-5555; 800-441-9695

Cage: 20696

Ingredients

TITANIUM OXIDE; (TITANIUM DIOXIDE (IN SOME COLORS))

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 25-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


PIGMENTS

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K


SOLVENT NAPHTHA (PETROLEUM), MEDIUM ALIPHATIC; (MEDIUM

CAS: 64742-88-7

Fraction By Weight: 40-45%

OSHA PEL N/K

ACGIH TLV: N/K


XYLENE (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-2%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 45-50%

OSHA PEL N/K

ACGIH TLV: N/K


EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN. SIGNS

RTECS: 9999999ZZ


LOSS OF COORD ARE INDICATIONS THAT SOLV LEVELS ARE

RTECS: 9999999ZZ


DISTURBS MAY INDICATE EXCESS EYE CONT. DRYNESS, ITCH,

RTECS: 9999999ZZ


W/EXCESSIVE SKIN CONTACT.

RTECS: 9999999ZZ


TO CORROSIVE MATERIAL, PERSISTENT SKIN/EYE

RTECS: 9999999ZZ


TO DETERM TYPE OF AIRBORNE CONTAMS AGAINST WHICH

RTECS: 9999999ZZ


BELOW STATED LIMIT & TO REMOVE DECOMP PRODUCTS DURING

RTECS: 9999999ZZ


ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL. EYE:CAUSES
SEV IRRIT. SKIN:MAY CAUSE MOD IRRIT. INHAL:VAP & SPRAY MIST MAY BE
HARMFUL. VAP IRRITS EYES, NOSE & THROAT. RPTD EXPOS TO HIGH VAP
CONCS MAY CAUSE IRRIT OF RESP SYS & PERM BRAIN DMG & NERV SYS DMG.
INTENT MISUSE BY DELIB CONC & INHAL CONTENTS CAN BE
HARMFUL/FATAL.(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CHRONIC:AVOID LONG TERM & RPTD CONT.
THIS PROD CONTAINS TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS
OF TITANIUM DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG TUMORS.
STUDIES W/HUMANS INV OLVED IN MFR OF THIS PIGMENT INDICATE NO INCR
RISK OF CANCER FROM EXPOS. POTNTL FOR INHAL OF TITANIUM DIOXIDE
(SUPDAT)

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LST 15 MINS. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER:IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF THIS PROD, CONT POIS CTL
CTR, EMER ROOM/MD IMMED; HAVE MSDS INFO AVAIL:INGEST, EXCESS EXPOS
(ING 11)

Fire Fighting

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS II
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT POSS AUTOIGNIT/EXPLO(SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHLD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE >120F. STORE LG QTYS IN
BLDGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II COMBUST
LIQS. CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:IF THIS MATL IS PART OF MULTIPLE COMPONENT COATING
SYS, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXT MAY HAVE HAZS OF ALL OF ITS PARTS. AVOID FREE FALL
OF LIQUIDS IN EXCESS OF A FEW INCHES.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) PAINT SPRAY/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE
EXPOS. READ RESP MFR'S INSTR UCTIONS & LITERATURE CAREFULLY (ING
12)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL(ING 13)
Protective Gloves:NITRILE/NEOPRENE RUB/POLYVINYL ALCOHOL.
Eye Protection:CHEM WORK GOGG W/FULL LGTH FCSHLD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
EXTING MEDIA:COMBUST LIQ FIRES. FIRE FIGHT PROC:WHEN EXPOSED TO EXTREME
HEAT. IF WATER IS USED, FOG NOZZS ARE PREF. EXPLO HAZ:SURFS. TOX
GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME/HOT SURFS. HAZ D
ECOMP PROD:FUMES INCL: CARBON MONOXIDE.EFTS OF OVEREXP:DUSTS FROM
COATINGS IS VERY LTD. SINCE OVEREXPS ARE NOT (ING 7)

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<3
Vapor Density:HVR/AIR
Spec Gravity:1.3
Evaporation Rate & Reference:<19 (BUOAC=100)
Solubility in Water:<1%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS.
Percent Volatiles by Volume:<54

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/THIS PROD
MAY PRDCE (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH APPROVED WASTE MANAGEMENT FACI LITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.